Yep, we may get a tiny thank-you (read: commission) when you buy through
links on Gadgetspotr — not enough for a yacht, but enough to keep the lights (and
servers) on.
Learn more
27
Highlights
45
Differences
5
Reactions
0
Likes
ANYCUBIC Photon
vs
ANYCUBIC Photon S:
27 Highlights & 45 Differences —
So, Which 3D Printer Actually Works Better
From print accuracy to build volume, see what makes each printer stand out.
What sets ANYCUBIC Photon apart from ANYCUBIC Photon S? This 3d printers face-off compares specs like height, weight, space requirement & build width and beyond.
ANYCUBIC Photon vs ANYCUBIC Photon S: A Detailed Comparison of Two Resin 3D Printing Titans
When it comes to resin 3D printing, the ANYCUBIC Photon and ANYCUBIC Photon S stand out as popular options for both consumer and professional users. Both models share fundamental characteristics such as the use of a 2560x1440p resolution screen, a closed enclosure design with carbon air filtration, and the ability to print with biocompatible materials at a compatible resin wavelength of 405 nm. However, the key distinctions lie in their build volume, printing speed, curing technology, and physical weight. These differences impact user experience and print performance, making them relevant for deciding which printer fits your specific needs. Let's dive deeper into what sets these resin printers apart.
ANYCUBIC Photon: The Classic Workhorse With Reliable UV Power
The ANYCUBIC Photon is notable for its solid build and reliable printing experience. Weighing in at roughly 21.2 lbs and with a package weight close to 20.94 lbs, it's a bit heavier than the Photon S, reflecting a sturdier frame design. Its build volume of approximately 57.14 cubic centimeters provides sufficient space for intricate prints.
Powered by an LCD UV light source with a higher 25 mW output, the Photon achieves effective and consistent resin curing, which users can count on for detailed models. Although its official maximum print speed peaks at 20 mm/hr, the actual performance settles around 10 mm/hr, producing prints with an accuracy of roughly 47 microns.
The original Photon also shines in its quieter operation, maintaining an idle noise level as low as 35 dB. Its power consumption is reasonably efficient at 40 W, making it suitable for home or office settings where noise and energy use matter. Its external power supply supports a voltage range from 110 to 220 volts, providing flexibility in various environments.
On the connectivity front, the Photon supports firmware updates, accepts STL and OBJ file formats, and offers a user-friendly print platform. The absence of remote firmware update or mobile app support is balanced somewhat by the printer's reliability. Safety compliance with CE, FCC, and RoHS certifications and a single safety sensor adds a layer of security during operation.
ANYCUBIC Photon S: Speed and Precision Take Center Stage
The ANYCUBIC Photon S was released as a more advanced MSLA alternative to the original Photon. Weighing considerably less at about 13 lbs, it's noticeably lighter, which can be beneficial for portability and desktop space. Despite similar dimensions and a package weight of approximately 20.94 lbs, it flaunts a significantly larger build volume, marked as roughly 1142.82 cubic centimeters; a remarkable leap that enables more ambitious projects.
Thanks to its LED-based UV light source, albeit with a lower power output of 5.6 mW, the Photon S compensates for this through printing speed. Its measured effective print speed doubles to 20 mm/hr, slicing print times in half, such as reducing the time to print a Benchy model from 180 minutes on the Photon to just 90 minutes.
Its print accuracy is slightly improved to 50 microns, resulting in finely detailed models. Although the increased performance comes with a tradeoff of a higher idle noise level of 50 dB and an uptick in power consumption to about 50 W, these are reasonable concessions for the added efficiency.
The Photon S also supports a greater resin tank capacity at 300 ml versus the Photon's 250 ml, offering a bit more room for extended printing sessions. It boasts a wider storage humidity range, from 10 to 90%, which can be advantageous for diverse environmental conditions.
Like the original Photon, this model supports firmware updates and standard STL and OBJ file formats. However, data on remote firmware updates and mobile app integration remains unspecified. Its safety credentials match the original, featuring one safety sensor and CE, FCC, and RoHS certifications.
Quick Take
The ANYCUBIC Photon stands out for its quieter operation, lower power consumption, and a dependable LCD-based UV curing system delivering higher UV output. Meanwhile, the ANYCUBIC Photon S impresses with its faster print speeds, bigger build volume, and marginally better print accuracy, though it trades off with slightly more noise and power usage.
Bottom Line
Choosing between the ANYCUBIC Photon and Photon S depends largely on priorities. If speed and a larger build size are critical, the Photon S is the superior choice, delivering more efficient prints with enhanced detail. On the other hand, for users who prioritize quieter operation and energy efficiency without sacrificing the quality benefits of a strong UV output, the Photon still offers excellent value.
Ultimately, the Photon S is the better all-around printer for those looking to maximize their resin 3D printing performance. At the same time, the original Photon remains a dependable and quieter option for more budget-conscious or noise-sensitive environments.
Verdict
Winner: ANYCUBIC Photon S - Exceptional print speed and larger build volume provide outstanding performance for a wider range of projects.
Runner-up: ANYCUBIC Photon - Reliable, quieter, and lower power consumption make it a solid choice for users valuing efficiency and quieter operation.
Side by side. The numbers. The features. No drama.
Is ANYCUBIC Photon better than ANYCUBIC Photon S? It depends on your needs. Our gadget breakdown lays out the full story — from specs to buyer feedback.
Both models are intended for Consumer and Professional use, highlighting their versatility and adaptability across personal and industrial applications.
Identifies the main user category.
In the battle of Intended Use,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Intended Use on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Both the ANYCUBIC Photon and ANYCUBIC Photon S are manufactured in China, so buyers get products from the same country of origin, reflecting similar production standards.
The country where the product is designed or manufactured.
In the battle of Country of Origin,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Country of Origin on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
The Warranty Period for both ANYCUBIC Photon and ANYCUBIC Photon S is 1 Year, offering the same basic coverage. Customers can expect equivalent warranty protection from both printers, making them equal in this aspect.
Coverage period offered by the manufacturer.
In the battle of Warranty Period,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Warranty Period on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Product Name
What is the product name?
0
ANYCUBIC Photon
0Votes
ANYCUBIC Photon
0
ANYCUBIC Photon S
0Votes
Anycubic Photon S
ANYCUBIC Photon
The product name ANYCUBIC Photon refers to a popular desktop resin 3D printer known for good quality and value.
ANYCUBIC Photon S
The official product name for this 3D printer is Anycubic Photon S.
The commercial name of the 3D printer.
In the battle of Product Name,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Product Name on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Target User Level
What is the target user level?
0
ANYCUBIC Photon
0Votes
Beginner, Intermediate
0
ANYCUBIC Photon S
0Votes
Beginner, Intermediate, Advanced, Professional
ANYCUBIC Photon
Target users include beginners and intermediate users, indicating ease of use paired with moderate features for learning and prototyping.
ANYCUBIC Photon S
The printer is suitable for a wide range of users, from Beginner hobbyists to Intermediate, Advanced, and Professional users, due to its user-friendly design and capabilities.
Indicates the recommended skill level.
In the battle of Target User Level,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Target User Level on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Assembly Type
What is the assembly type?
0
ANYCUBIC Photon
0Votes
Prebuilt
0
ANYCUBIC Photon S
0Votes
Prebuilt
ANYCUBIC Photon
The printer comes prebuilt, allowing users to start printing shortly after unpacking without assembly.
ANYCUBIC Photon S
The printer comes Prebuilt from the factory, meaning it requires minimal setup and is ready to use shortly after unboxing.
Shows whether the printer is sold as a kit requiring assembly or fully prebuilt.
In the battle of Assembly Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Release Year
What is the release year?
0
ANYCUBIC Photon
0Votes
2018
0
ANYCUBIC Photon S
0Votes
2019
vs
Release Year
ANYCUBIC Photon was released in 2018, whereas the Photon S came a year later, in 2019. This newer release generally means the Photon S may benefit from improved features and technology advancements.
The year the 3D printer was first released.
In the battle of Release Year,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Release Year on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
0
ANYCUBIC Photon S
0Votes
Prototyping, Miniatures, Engineering, Dental, Jewelry
ANYCUBIC Photon
Common supported applications include miniatures, dental, and jewelry, which benefit from the printer's high-detail output.
Lists the most common applications supported.
In the battle of Supported Applications,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Applications on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Model Number
What is the model number?
0
ANYCUBIC Photon
0Votes
Photon
0
ANYCUBIC Photon S
0Votes
Photon S
Manufacturer’s reference code for precise identification.
In the battle of Model Number,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Model Number on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Printer Type
What type of printer is it?
0
ANYCUBIC Photon
0Votes
DLP
0
ANYCUBIC Photon S
0Votes
MSLA
vs
Printer Type
ANYCUBIC Photon uses DLP technology, while ANYCUBIC Photon S employs MSLA. This affects print methodology, with MSLA generally offering finer details, making Photon S potentially better for detail-critical projects.
Defines the printing technology used by the machine.
In the battle of Printer Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Printer Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Assembly Required
Is assembly required?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
States if the printer requires assembly.
In the battle of Assembly Required,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Required on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Upgrade Path
Does it support an upgrade path?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Whether the printer can be expanded with official or third-party upgrades.
In the battle of Upgrade Path,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Path on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
ANYCUBIC Photon weighs 21.2 lbs, while Photon S is lighter at 13 lbs. Photon S’s lighter build enhances portability and ease of setup, preferable for mobile or frequently moved setups.
Net weight of the printer.
In the battle of Weight,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
higher
8.2 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Weight on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
ANYCUBIC Photon requires 0.53 sq ft of space, slightly more than Photon S's 0.52 sq ft. This marginal difference indicates both have similar compact footprints, ideal for small work areas.
The minimum flat surface area needed to safely place the printer.
In the battle of Space Requirement,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
equal
0.53 sq ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Space Requirement on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Heights are comparable with Photon at 15.8 inches and Photon S at 15.74 inches, so both fit similarly in vertical spaces.
The total external height of the printer.
In the battle of Height,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
higher
0.1 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Height on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Width
What is the printer’s width?
7.9
inch
0Votes
9.05
inch
0Votes
ANYCUBIC Photon
The printer width is 7.9 inches (20.07 cm), making it compact enough for desktop use.
ANYCUBIC Photon S
The printer's width is 9.05 inch (22.99 cm), which helps determine the required space for operation.
The total external width of the printer.
In the battle of Width,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
1.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Width on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Depth
What is the printer’s depth?
8.7
inch
0Votes
7.87
inch
0Votes
ANYCUBIC Photon
The printer depth measures 8.7 inches (22.1 cm), contributing to its small footprint.
ANYCUBIC Photon S
The physical depth of the printer is 7.87 inch (20.00 cm), indicating its footprint on a workbench or desk.
The total external depth of the printer.
In the battle of Depth,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
higher
0.8 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Depth on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Package Height
What is the package height?
21.26
inch
0Votes
22.05
inch
0Votes
ANYCUBIC Photon
Package height is 21.26 inches (54 cm), relevant for transportation and unboxing.
ANYCUBIC Photon S
The packaging has a height of 22.05 inch (56.01 cm), which is important for shipping and storage considerations.
Height of the printer’s packaging.
In the battle of Package Height,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
0.8 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Height on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Build-to-Printer Size Ratio
What is the build-to-printer size ratio?
7.5
%
0Votes
1.37
%
0Votes
vs
Build-to-Printer Size Ratio
ANYCUBIC Photon has a Build-to-Printer Size Ratio of 7.5%, significantly higher than Photon S's 1.37%. This indicates Photon S is more space-efficient relative to build size, better for users with limited workspace.
The efficiency ratio of build volume relative to the overall printer size.
In the battle of Build-to-Printer Size Ratio,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
higher
6.1 %
measurement.
Don’t keep it to yourself — be the first to react and review the
Build-to-Printer Size Ratio on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Package Width
What is the package width?
11.41
inch
0Votes
12.8
inch
0Votes
ANYCUBIC Photon
Package width is 11.41 inches (29 cm), relevant for packaging and transportation.
Width of the printer’s packaging.
In the battle of Package Width,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
1.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Width on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Package Depth
What is the package depth?
10.62
inch
0Votes
12.8
inch
0Votes
ANYCUBIC Photon S
The package has a depth of 12.8 inch (32.51 cm), providing protection for the printer during transit.
Depth of the printer’s packaging.
In the battle of Package Depth,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
2.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Depth on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Package Weight
What is the package weight?
20.94
lbs
0Votes
20.94
lbs
0Votes
vs
Package Weight
The Package Weight is identical at 20.94 lbs for both ANYCUBIC Photon and Photon S, meaning shipping and handling considerations remain the same.
total shipping weight including packaging.
In the battle of Package Weight,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
20.94 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Weight on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Folded Width
What is the folded width?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Width of the printer when folded (if applicable).
Don’t keep it to yourself — be the first to react and review the
Folded Width on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Folded Depth
What is the folded depth?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Depth of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Depth on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Folded Height
What is the folded height?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Height of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Height on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Power Consumption is 40 Watts for ANYCUBIC Photon and slightly higher at 50 Watts for Photon S, which might reflect increased performance at a minor energy cost.
Average power usage during active printing.
In the battle of Power Consumption,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
10.0 Watt
measurement.
Based on community votes for Power Consumption,
ANYCUBIC Photon ◉ earned
1 votes,
more than
ANYCUBIC Photon S ◉,
which got 0 votes.
I prefer the ANYCUBIC Photon for operating humidity since both handle 20-80 percent but the Photon is a bit more straightforward on power settings.
See more
Power Supply Type
What type of power supply does it use?
0
ANYCUBIC Photon
0Votes
External
0
ANYCUBIC Photon S
0Votes
External
vs
Power Supply Type
Both printers use an External Power Supply Type, making replacement or upgrading power units easier and standardized.
Indicates whether the printer uses an internal or external power supply.
In the battle of Power Supply Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Storage Temperature Range
What is the storage temperature range?
0
ANYCUBIC Photon
0Votes
32-95°F
0
ANYCUBIC Photon S
0Votes
40-100°F
ANYCUBIC Photon S
The printer should be stored within a temperature range of 40-100°F (4.44-37.78°C) to protect its components and resin.
Safe temperature range for storing the printer when not in use.
In the battle of Storage Temperature Range,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Temperature Range on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Storage Humidity Range
What is the storage humidity range?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
0
ANYCUBIC Photon S
0Votes
10-90%
vs
Storage Humidity Range
Storage Humidity Range is unavailable for ANYCUBIC Photon but spans 10-90% for Photon S, suggesting Photon S can be stored safely in a wider range of environments.
Safe humidity range for storing the printer.
Don’t keep it to yourself — be the first to react and review the
Storage Humidity Range on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Idle Power Consumption
What is the idle power consumption?
10
Watt
0Votes
20
Watt
0Votes
ANYCUBIC Photon
Idle power consumption stands at 10 watts, demonstrating energy efficiency when the printer is not actively printing.
Power drawn while the printer is on but not printing.
In the battle of Idle Power Consumption,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
10.0 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Power Consumption on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Operating Temperature Range
What is the operating temperature range?
0
ANYCUBIC Photon
0Votes
77-95°F
0
ANYCUBIC Photon S
0Votes
68-86°F
Recommended ambient temperature range for safe operation.
In the battle of Operating Temperature Range,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Temperature Range on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Power Supply Voltage
What is the required power supply voltage?
0
ANYCUBIC Photon
0Votes
110-220 Volt
0
ANYCUBIC Photon S
0Votes
100-240 Volt
vs
Power Supply Voltage
Power Supply Voltage varies, Photon supports 110-220 Volt, whereas Photon S has a broader range of 100-240 Volt, offering more global compatibility with power sources.
Voltage input supported by the printer’s power supply.
In the battle of Power Supply Voltage,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Voltage on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Energy Saving Mode
Does it have energy saving mode?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether the printer includes an energy-saving or eco mode.
In the battle of Energy Saving Mode,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Energy Saving Mode on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Build Volume differs significantly, ANYCUBIC Photon has 57.14 cubic inches, while Photon S offers a much larger 1142.82 cubic inches. Photon S is superior for larger print projects.
total printable volume capacity.
In the battle of Build Volume,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
lower
1,085.7 cubic in
measurement.
Based on community votes for Build Volume,
ANYCUBIC Photon ◉ earned
0 votes,
less than
ANYCUBIC Photon S ◉,
which got 1 votes.
Both printers offer a Layer Resolution Minimum of 25 microns, facilitating very fine layer detailing for prints.
Finest layer height achievable.
In the battle of Layer Resolution Minimum,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
25.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Minimum on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Default nozzle diameter provided.
Don’t keep it to yourself — be the first to react and review the
Standard Nozzle Diameter on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Build Height
What is the build height?
6.1
inch
0Votes
6.1
inch
0Votes
ANYCUBIC Photon
The build height is 6.1 inches (15.49 cm), defining the maximum vertical print size possible.
ANYCUBIC Photon S
The maximum height for objects that can be printed is 6.1 inch (15.49 cm).
Maximum printable height of the build area.
In the battle of Build Height,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
6.10 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Height on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Layer Resolution Maximum
What is the maximum layer resolution?
100
microns
0Votes
100
microns
0Votes
vs
Layer Resolution Maximum
Layer Resolution Maximum is 100 microns on both models, accommodating coarser layers when speed is prioritized over detail.
Thickest layer height achievable.
In the battle of Layer Resolution Maximum,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
100.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Maximum on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Optional Nozzle Sizes
What optional nozzle sizes are supported?
0
ANYCUBIC Photon
0Votes
None
0
ANYCUBIC Photon S
0Votes
None
ANYCUBIC Photon S
As an MSLA resin printer, it does not use traditional FDM-style nozzles, thus None are applicable.
Alternative nozzle sizes supported.
In the battle of Optional Nozzle Sizes,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Optional Nozzle Sizes on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Extruder Drive Type
What type of extruder drive does it use?
0
ANYCUBIC Photon
0Votes
None
0
ANYCUBIC Photon S
0Votes
None
ANYCUBIC Photon
The extruder drive type is none, consistent with resin SLA printers not using filament extrusion.
The type of filament feeding system.
In the battle of Extruder Drive Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Drive Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Filament Diameter Supported
What filament diameter is supported?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
The filament size compatible with printer.
Don’t keep it to yourself — be the first to react and review the
Filament Diameter Supported on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Max Extruder Temperature
What is the max extruder temperature?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Maximum heating capability of extruder.
Don’t keep it to yourself — be the first to react and review the
Max Extruder Temperature on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Min Extruder Temperature
What is the min extruder temperature?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Lowest operable extruder temperature.
Don’t keep it to yourself — be the first to react and review the
Min Extruder Temperature on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Max Bed Temperature
What is the max bed temperature?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Maximum heated bed temperature.
Don’t keep it to yourself — be the first to react and review the
Max Bed Temperature on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Bed Temperature Gradient
What is the bed temperature gradient?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Variance in heat across the bed surface.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Gradient on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Heated Chamber
Does the printer have a heated chamber?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether the printer has a heated build chamber.
In the battle of Heated Chamber,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Heated Chamber on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Chamber Temperature Control Range
What is the chamber temperature control range?
0
ANYCUBIC Photon
0Votes
None
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Range of temperatures the printer chamber can maintain
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Control Range on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Number of Extruders
How many extruders does the printer have?
0
ANYCUBIC Photon
0Votes
0
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
total extruders installed.
Don’t keep it to yourself — be the first to react and review the
Number of Extruders on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Dual Extruders
Does it support dual extruders?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Indicates if printer can run dual extruders.
In the battle of Dual Extruders,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Dual Extruders on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Independent Dual Extruder
Does it have IDEX support?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether the printer supports independent extruder heads.
In the battle of Independent Dual Extruder,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Independent Dual Extruder on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Quick-Swap Nozzles
Does it have quick-swap nozzles?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Nozzles can be quickly swapped without tools.
In the battle of Quick-Swap Nozzles,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Quick-Swap Nozzles on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Hotend Replaceable
Is the hotend replaceable?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether the hotend can be replaced.
In the battle of Hotend Replaceable,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Hotend Replaceable on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Compatible Resin Wavelength is consistent at 405 nm for both printers, ensuring compatibility with a wide range of standard resins.
Light wavelength compatibility for curing resins.
In the battle of Compatible Resin Wavelength,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
405.00 nm
measurement.
Don’t keep it to yourself — be the first to react and review the
Compatible Resin Wavelength on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Both printers support Biocompatible Materials, a valuable feature for medical or dental applications, providing flexibility in material choice.
Supports resins/filaments approved for medical or dental use.
In the battle of Biocompatible Materials Support,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Biocompatible Materials Support on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Max Resin Tank Capacity is 250 mL on ANYCUBIC Photon and slightly larger at 300 mL for Photon S, allowing for longer printing sessions without refilling on Photon S.
Maximum amount of resin the tank can hold.
In the battle of Max Resin Tank Capacity,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
lower
50.0 mL
measurement.
Based on community votes for Max Resin Tank Capacity,
ANYCUBIC Photon ◉ earned
0 votes,
less than
ANYCUBIC Photon S ◉,
which got 1 votes.
Max resin tank capacity is bigger on the Photon S so it lasts longer between refills making it more convenient.
See more
Max Number of Materials Supported
What is the maximum number of materials supported?
0
ANYCUBIC Photon
0Votes
1
0
ANYCUBIC Photon S
0Votes
1
ANYCUBIC Photon
The printer supports a maximum of one material during printing, typical for resin-based SLA printers.
ANYCUBIC Photon S
This printer supports the use of 1 material (resin) at a time, which is common for most MSLA resin printers.
Maximum distinct materials supported in one job.
In the battle of Max Number of Materials Supported,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Max Number of Materials Supported on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Supported Filament Types
What filament types are supported?
0
ANYCUBIC Photon
0Votes
None
0
ANYCUBIC Photon S
0Votes
ABS-like, Standard, Plant-based, Dental, Jewelry
ANYCUBIC Photon
Filament printing is not supported, as indicated by 'None' in supported filament types because this is an SLA resin printer.
Filament materials that the printer can process.
In the battle of Supported Filament Types,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Filament Types on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Third-Party Material
Does it support third-party materials?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
ANYCUBIC Photon
Third-party materials are supported, allowing flexibility in resin choice beyond proprietary brands.
Ability to use non-proprietary materials.
In the battle of Third-Party Material,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Third-Party Material on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Max Supported Filament Diameter
What is the maximum supported filament diameter?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Maximum filament diameter that can be used.
Don’t keep it to yourself — be the first to react and review the
Max Supported Filament Diameter on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Filament Dry Box
Does it support filament dry boxes?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Supports use of a dry box to prevent filament moisture issues.
In the battle of Filament Dry Box,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Dry Box on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Filament Auto-Loading
Does it have filament auto-loading?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
vs
Filament Auto-Loading
Filament Auto-Loading is No for Photon and not applicable (n/a) for Photon S since these are resin printers, so this feature is generally irrelevant.
Automatic feeding of filament into extruder.
In the battle of Filament Auto-Loading,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Auto-Loading on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Filament Drying Required
Is filament drying required?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether drying filament before use is necessary.
In the battle of Filament Drying Required,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Drying Required on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Multi-Material Printing
Can it print with multiple materials?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Ability to print with multiple materials simultaneously.
In the battle of Multi-Material Printing,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Material Printing on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Supported Resin Types
What resin types are supported?
0
ANYCUBIC Photon
0Votes
Standard
0
ANYCUBIC Photon S
0Votes
Standard, Plant-based, ABS-like, Dental, Jewelry
Resin types that the printer can use.
In the battle of Supported Resin Types,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Resin Types on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Resin Auto-Fill
Does it have resin auto-fill?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
vs
Resin Auto-Fill
Resin Auto-Fill is No on ANYCUBIC Photon but unavailable (n/a) on Photon S. Photon’s lack means manual resin refilling is required, while Photon S’s info is missing.
Automatic filling of resin during prints.
In the battle of Resin Auto-Fill,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Auto-Fill on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Time to Print Benchy is 180 minutes for Photon and only 90 minutes for Photon S, showing Photon S prints this benchmark model twice as fast, suitable for faster prototyping.
Average time to complete the benchmark “Benchy” model.
In the battle of Time to Print Benchy,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
higher
90.0 minutes
measurement.
Based on community votes for Time to Print Benchy,
ANYCUBIC Photon ◉ earned
0 votes,
less than
ANYCUBIC Photon S ◉,
which got 1 votes.
Official Max Print Speed is identical at 20 mm/s for both models, indicating peak speed capabilities are the same despite differences in effective speeds.
Manufacturer-claimed maximum print speed.
In the battle of Official Max Print Speed,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
20.00 mm/s
measurement.
Don’t keep it to yourself — be the first to react and review the
Official Max Print Speed on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Print Accuracy is slightly better on ANYCUBIC Photon at 47 microns compared to 50 microns on Photon S, suggesting Photon might deliver marginally finer prints.
Degree of dimensional accuracy of printed parts.
In the battle of Print Accuracy,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
lower
3.0 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Print Accuracy on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Idle Noise Level is lower in Photon at 35 dB compared to 50 dB in Photon S, making the original Photon quieter during non-printing times for a less disruptive environment.
Measures the noise when printer is on but not printing; lower is better.
In the battle of Idle Noise Level,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
15.0 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Noise Level on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Measured Effective Print Speed
What is the effective measured print speed?
10
mm/s
0Votes
20
mm/s
0Votes
vs
Measured Effective Print Speed
Measured Effective Print Speed doubles from 10 mm/s in ANYCUBIC Photon to 20 mm/s in Photon S, enabling the latter to print twice as fast, enhancing productivity.
Independently measured real-world print speed.
In the battle of Measured Effective Print Speed,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
lower
10.0 mm/s
measurement.
Don’t keep it to yourself — be the first to react and review the
Measured Effective Print Speed on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
First Layer Calibration
How is the first layer calibrated?
0
ANYCUBIC Photon
0Votes
Manual
0
ANYCUBIC Photon S
0Votes
Manual
ANYCUBIC Photon
First layer calibration must be done manually, giving users control to ensure proper adhesion and print success.
Method used for first-layer bed calibration.
In the battle of First Layer Calibration,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
First Layer Calibration on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Print Adhesion Type
What type of print adhesion is used?
0
ANYCUBIC Photon
0Votes
Metal
0
ANYCUBIC Photon S
0Votes
PFA
ANYCUBIC Photon S
The print adhesion type is PFA, referring to a specific release film (like FEP/PFA film) used at the bottom of the resin vat to allow cured layers to detach easily.
Method used to secure prints to the bed.
In the battle of Print Adhesion Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Adhesion Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Continuous Print Time
What is the max continuous print time?
24
hours
0Votes
48
hours
0Votes
ANYCUBIC Photon
The printer supports continuous print operations of up to 24 hours, accommodating long print jobs.
Maximum supported printing time without interruption.
In the battle of Continuous Print Time,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
lower
24.0 hours
measurement.
Don’t keep it to yourself — be the first to react and review the
Continuous Print Time on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Print Success Rate
What is the print success rate?
85
%
0Votes
80
%
0Votes
ANYCUBIC Photon S
The expected print success rate for this machine is around 80% under ideal conditions and with proper settings.
Percentage of prints successfully completed.
In the battle of Print Success Rate,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
higher
5.0 %
measurement.
Don’t keep it to yourself — be the first to react and review the
Print Success Rate on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Operating Noise Level
What is the operating noise level?
50
dB
0Votes
39
dB
0Votes
ANYCUBIC Photon
Operating noise level is 50 dB, roughly equivalent to a quiet office, making it suitable for home or small workshop environments.
Measures the sound generated during printing; lower is quieter.
In the battle of Operating Noise Level,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
higher
11.0 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Operating Noise Level on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Print Quality Rating
What is the print quality rating?
0
ANYCUBIC Photon
0Votes
8
0
ANYCUBIC Photon S
0Votes
8
ANYCUBIC Photon
Print quality is rated 8 on a scale likely up to 10, signaling high-resolution and detailed output capabilities.
Rated score for overall print quality (0–10).
In the battle of Print Quality Rating,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Quality Rating on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Bridging Performance
What is the bridging performance?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Longest unsupported horizontal span printed without sagging.
Don’t keep it to yourself — be the first to react and review the
Bridging Performance on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Overhang Performance
What is the overhang performance?
Who knows?
0Votes
ANYCUBIC Photon
(Help us out by suggesting one!)
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
Maximum angle of unsupported overhangs achievable.
Don’t keep it to yourself — be the first to react and review the
Overhang Performance on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Spaghetti/Fault Detection
Does it have spaghetti or fault detection?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Detects failed prints or filament tangles.
In the battle of Spaghetti/Fault Detection,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Spaghetti/Fault Detection on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Print Recovery
Does the printer support print recovery?
No
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Ability to resume print after power loss or interruption.
In the battle of Print Recovery,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Recovery on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
The built-in screen size is 2.8 inches (7.11 cm), providing a compact interface for printer controls.
Size of the display screen.
In the battle of Screen Size,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
2.80 Inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Screen Size on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Enclosure
Is the printer open or enclosed?
0
ANYCUBIC Photon
0Votes
Closed
0
ANYCUBIC Photon S
0Votes
Closed
ANYCUBIC Photon
The printer is enclosed, helping to control resin fumes and maintain consistent printing conditions.
ANYCUBIC Photon S
The Closed enclosure helps maintain a stable printing environment, protects from UV light exposure, and contains resin fumes, contributing to safer and more consistent prints.
Whether the printer has an open or enclosed build chamber.
In the battle of Enclosure,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Air Filtration
What type of air filtration is included?
0
ANYCUBIC Photon
0Votes
Carbon
0
ANYCUBIC Photon S
0Votes
Carbon
ANYCUBIC Photon
The printer includes a carbon air filtration system, which helps reduce odors and improve air quality around the device during resin curing.
ANYCUBIC Photon S
This 3D printer features Carbon air filtration, which helps to absorb odors and volatile organic compounds (VOCs) emitted during the resin printing process, improving air quality.
Air filtering system for reducing fumes and particulates.
In the battle of Air Filtration,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Filtration on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Manual Bed Leveling
Does it support manual bed leveling?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
ANYCUBIC Photon
Manual bed leveling is necessary, giving users hands-on control to ensure print surface accuracy.
ANYCUBIC Photon S
The printer requires manual bed leveling, a user-controlled process to ensure the build plate is properly aligned for optimal first layer adhesion.
Support for traditional manual bed leveling.
In the battle of Manual Bed Leveling,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Manual Bed Leveling on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Screen Resolution
What is the display resolution?
0
ANYCUBIC Photon
0Votes
2560x1440p
0
ANYCUBIC Photon S
0Votes
2560x1440p
ANYCUBIC Photon
The screen resolution is 2560x1440 pixels, contributing to the fine detail and sharpness achievable in prints.
Resolution of the display screen.
In the battle of Screen Resolution,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Screen Resolution on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Build Plate Type
What type of build plate does it have?
0
ANYCUBIC Photon
0Votes
Metal
0
ANYCUBIC Photon S
0Votes
Metal
ANYCUBIC Photon
The build plate type is metal, often favored for durability and good adhesion with resins.
Type of build surface material.
In the battle of Build Plate Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Build Plate Removable
Is the build plate removable?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
ANYCUBIC Photon
The build plate is removable, simplifying print removal and maintenance.
Whether the build plate can be detached for print removal.
In the battle of Build Plate Removable,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Removable on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Motion System
What is the motion system?
0
ANYCUBIC Photon
0Votes
Rods
0
ANYCUBIC Photon S
0Votes
Linear Rails
ANYCUBIC Photon
It uses rods in its motion system, typically providing stable and precise axis movements.
Mechanical motion system guiding the print head.
In the battle of Motion System,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Motion System on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Toolhead Modularity
What modular toolheads are supported?
0
ANYCUBIC Photon
0Votes
None
0
ANYCUBIC Photon S
0Votes
None
ANYCUBIC Photon S
The printer does not support toolhead modularity, meaning its primary function is 3D printing and it cannot be easily adapted for other processes like laser engraving or CNC milling.
Whether the toolhead can be swapped for other functions.
In the battle of Toolhead Modularity,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Toolhead Modularity on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Frame Type
What is the frame type?
0
ANYCUBIC Photon
0Votes
Z-axis
0
ANYCUBIC Photon S
0Votes
Z-axis
Mechanical structure style of the printer.
In the battle of Frame Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Frame Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Touchscreen Display
Does it have a touchscreen display?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Indicates if a touchscreen is provided for controls.
In the battle of Touchscreen Display,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Touchscreen Display on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Built-in Camera
Does it have a built-in camera?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Camera for monitoring prints and creating time-lapses.
In the battle of Built-in Camera,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Built-in Camera on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Lighting Inside Chamber
Does it have chamber lighting?
No
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Chamber lighting to monitor prints in progress.
In the battle of Lighting Inside Chamber,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Lighting Inside Chamber on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Chamber Lighting Color Modes
What chamber lighting modes are available?
0
ANYCUBIC Photon
0Votes
None
0
ANYCUBIC Photon S
0Votes
White
Options for chamber lighting colors.
In the battle of Chamber Lighting Color Modes,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Lighting Color Modes on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Build Plate Surface Texture
What is the build plate texture?
0
ANYCUBIC Photon
0Votes
Sandblasted
0
ANYCUBIC Photon S
0Votes
Sandblasted
Surface finish of the build plate.
In the battle of Build Plate Surface Texture,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Surface Texture on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Auto Bed Leveling
Does it support auto bed leveling?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Automatic calibration of the print bed.
In the battle of Auto Bed Leveling,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Bed Leveling on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Filament Runout Sensor
Does it have a filament runout sensor?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Detects when filament runs out and pauses printing.
In the battle of Filament Runout Sensor,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Runout Sensor on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Power Loss Recovery
Does it support power loss recovery?
No
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Recovers print jobs after power interruptions.
In the battle of Power Loss Recovery,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Loss Recovery on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Cooling Fans
Does it have cooling fans?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Fans for cooling extruder and printed layers.
In the battle of Cooling Fans,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Cooling Fans on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Vibration Compensation
Does it support vibration compensation?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Compensation system to reduce print artifacts.
In the battle of Vibration Compensation,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Compensation on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Ability to use a mobile app for control/monitoring.
In the battle of Mobile App,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Mobile App on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Connectivity Options
What connectivity options are available?
0
ANYCUBIC Photon
0Votes
USB, Wi-Fi, LAN
0
ANYCUBIC Photon S
0Votes
USB
ANYCUBIC Photon
Connectivity options include USB, Wi-Fi, and LAN, allowing flexible networking and file transfer modes.
ANYCUBIC Photon S
The primary method for transferring print files to the device is via USB.
Available connection types for file transfer and control.
In the battle of Connectivity Options,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Connectivity Options on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Supported Slicers
Which slicers are supported?
0
ANYCUBIC Photon
0Votes
Linear Rails
0
ANYCUBIC Photon S
0Votes
Anycubic Slicer, CHITUBOX
ANYCUBIC Photon
Supported slicers include Linear Rails, catering to precise movement control important for maintaining print accuracy.
Slicer programs that are compatible with the printer.
In the battle of Supported Slicers,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Slicers on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
File Transfer Method
What file transfer methods are supported?
0
ANYCUBIC Photon
0Votes
USB, SD Card
0
ANYCUBIC Photon S
0Votes
USB
ANYCUBIC Photon
The printer supports file transfers via USB and SD Card, facilitating straightforward and direct data input without needing internet connectivity.
Methods available to transfer files to the printer.
In the battle of File Transfer Method,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
File Transfer Method on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Supported File Formats
What file formats are supported?
0
ANYCUBIC Photon
0Votes
STL, OBJ
0
ANYCUBIC Photon S
0Votes
STL, OBJ
ANYCUBIC Photon
Supported file formats include STL and OBJ, which are common industry standards allowing for compatibility with many 3D modeling and slicing software.
File types accepted for printing.
In the battle of Supported File Formats,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported File Formats on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Cloud-Based Software
Does it support cloud-based software?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Indicates whether the printer uses or supports cloud software.
In the battle of Cloud-Based Software,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud-Based Software on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Proprietary Software Required
Is proprietary software required?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether use of manufacturer’s software is mandatory.
In the battle of Proprietary Software Required,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Proprietary Software Required on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
API/SDK Integration
Does it support API/SDK integration?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Allows developers to integrate with APIs or SDKs.
In the battle of API/SDK Integration,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
API/SDK Integration on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
In the battle of Multi-Printer Fleet Control,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Printer Fleet Control on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Time-Lapse Recording
Does it support time-lapse recording?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Ability to capture time-lapse videos of prints.
In the battle of Time-Lapse Recording,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Time-Lapse Recording on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Remote Firmware Update
Does it support remote firmware updates?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Supports updating firmware remotely.
In the battle of Remote Firmware Update,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Firmware Update on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
This printer is compatible with various post-processing equipment, which is essential for washing and curing resin prints after they come off the build plate.
Whether the printer supports integration with wash/cure stations.
In the battle of Post-Processing Equipment Compatibility,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Post-Processing Equipment Compatibility on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Type of UV light source used to cure resin layers.
In the battle of UV Light Source Type,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
UV Light Source Type on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Resin Layer Curing Speed
What is the resin layer curing speed?
8
sec/layer
0Votes
8
sec/layer
0Votes
ANYCUBIC Photon
Each resin layer cures in approximately 8 seconds, allowing relatively fast printing while maintaining high detail.
ANYCUBIC Photon S
Each layer of resin can be cured in approximately 8 seconds, which contributes to the overall print speed.
Time required to cure one resin layer.
In the battle of Resin Layer Curing Speed,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
8.00 sec/layer
measurement.
Don’t keep it to yourself — be the first to react and review the
Resin Layer Curing Speed on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Wash Time
What is the wash time?
5
minutes
0Votes
5
minutes
0Votes
ANYCUBIC Photon
Wash time is about 5 minutes, used for cleaning printed parts post-cure to remove excess resin.
ANYCUBIC Photon S
After printing, parts typically require a wash time of around 5 minutes to remove uncured resin before the final curing step.
Typical duration to wash prints in post-processing.
In the battle of Wash Time,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
, delivering
equal
5.00 minutes
measurement.
Don’t keep it to yourself — be the first to react and review the
Wash Time on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Cure Time
What is the cure time?
10
minutes
0Votes
5
minutes
0Votes
ANYCUBIC Photon
Typical full cure time is approximately 10 minutes, depending on resin type and layer settings.
ANYCUBIC Photon S
After printing, parts may require an additional UV post-curing phase, typically taking around 5 minutes, to achieve maximum hardness and strength.
Typical duration to fully cure resin prints after washing.
In the battle of Cure Time,
ANYCUBIC Photon ◉ is
worse than
ANYCUBIC Photon S ◉
, delivering
higher
5.0 minutes
measurement.
Don’t keep it to yourself — be the first to react and review the
Cure Time on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Resin Tank Lifetime
What is the resin tank lifetime?
0
ANYCUBIC Photon
0Votes
20-50 prints
Who knows?
0Votes
ANYCUBIC Photon S
(Help us out by suggesting one!)
ANYCUBIC Photon
The resin tank has a lifetime of 20 to 50 prints, which is typical for resin tanks depending on usage and maintenance.
Approximate number of prints before resin tank replacement.
Don’t keep it to yourself — be the first to react and review the
Resin Tank Lifetime on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
UV Power Output
What is the UV power output?
25
mW/cm²
0Votes
5.6
mW/cm²
0Votes
Strength of UV light exposure affecting curing speed and accuracy.
In the battle of UV Power Output,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
higher
19.4 mW/cm²
measurement.
Don’t keep it to yourself — be the first to react and review the
UV Power Output on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Resin Cartridge System
Does it use a resin cartridge system?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether it uses a sealed resin cartridge system for easy handling.
In the battle of Resin Cartridge System,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Cartridge System on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Auto Resin Mixing
Does it have auto resin mixing?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether resin is automatically mixed during operation for consistency.
In the battle of Auto Resin Mixing,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Resin Mixing on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Resin Heating System
Does it have a resin heating system?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Whether the printer can heat resin for optimal viscosity.
In the battle of Resin Heating System,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Heating System on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
The device has one safety sensor, providing a basic level of operational safety monitoring.
ANYCUBIC Photon S
The printer is equipped with 1 safety sensor, often used for features like detecting an open cover or the presence of the resin vat, enhancing user safety.
Number of safety sensors installed in the printer.
In the battle of Safety Sensors Count,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Safety Sensors Count on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Safety certifications include CE, FCC, and RoHS, ensuring compliance with key regulatory standards for electronics and safety.
Official safety standards the printer complies with.
In the battle of Safety Certifications,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Safety Certifications on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Overheat Protection
Does it feature overheat protection?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
ANYCUBIC Photon
Overheat protection is included, enhancing safety by preventing damage due to excessive temperature.
Shuts down printer when components exceed safe temps.
In the battle of Overheat Protection,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Overheat Protection on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Enclosure Lock
Does it have an enclosure lock?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Prevents accidental access to the chamber while printing.
In the battle of Enclosure Lock,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure Lock on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Emergency Stop Button
Does it have an emergency stop button?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Dedicated button to stop the printer instantly in emergencies.
In the battle of Emergency Stop Button,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Emergency Stop Button on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Fireproof Build Plate
Does it have a fireproof build plate?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Build plate is resistant to fire for extra safety.
In the battle of Fireproof Build Plate,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Fireproof Build Plate on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Auto Shutdown on Error
Does it auto shut down on errors?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Shuts printer down automatically when critical errors occur.
In the battle of Auto Shutdown on Error,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Shutdown on Error on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Resin Spill Protection
Does it have resin spill protection?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Prevents or contains resin leaks in resin printers.
In the battle of Resin Spill Protection,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Spill Protection on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Child Lock Mode
Does it have a child lock mode?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
A setting that prevents unauthorized or unsafe use by children.
In the battle of Child Lock Mode,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Child Lock Mode on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Air Quality Compliance
Is it compliant with air quality standards?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Meets air quality standards for emissions and filtration.
In the battle of Air Quality Compliance,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Quality Compliance on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Specifies if the nozzle can be replaced with different sizes or when worn.
In the battle of Nozzle Replaceable,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Nozzle Replaceable on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
In the battle of Maintenance Reminders,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Maintenance Reminders on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Lubrication Required
Does it require lubrication?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
ANYCUBIC Photon
Lubrication is required for smooth mechanical operation and to extend the lifespan of moving parts.
Indicates if lubrication is needed for smooth operation.
In the battle of Lubrication Required,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Lubrication Required on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Spare Parts Availability
Are spare parts available?
Yes
0Votes
ANYCUBIC Photon
Yes
0Votes
ANYCUBIC Photon S
Whether spare parts are readily available for purchase.
In the battle of Spare Parts Availability,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Spare Parts Availability on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Supported Mod Kits
What mod kits are supported?
0
ANYCUBIC Photon
0Votes
None
0
ANYCUBIC Photon S
0Votes
None
Officially supported modification kits.
In the battle of Supported Mod Kits,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Mod Kits on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Self-Diagnostics
Does it have self-diagnostics?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Printer can analyze itself for common faults and errors.
In the battle of Self-Diagnostics,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Self-Diagnostics on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Predictive Maintenance Alerts
Does it feature predictive maintenance alerts?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Predicts potential failures and alerts the user before issues arise.
In the battle of Predictive Maintenance Alerts,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Maintenance Alerts on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Tool-Free Maintenance
Is tool-free maintenance supported?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Allows key maintenance tasks without tools.
In the battle of Tool-Free Maintenance,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Tool-Free Maintenance on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Service Interval
What is the service interval?
100
hours
0Votes
200
hours
0Votes
Recommended time between major servicing.
In the battle of Service Interval,
ANYCUBIC Photon ◉ is
better than
ANYCUBIC Photon S ◉
, delivering
lower
100.0 hours
measurement.
Don’t keep it to yourself — be the first to react and review the
Service Interval on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Business & Professional Features
10
Print Farm Management
Does it support print farm management?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Indicates if multiple printers can be networked and managed as a farm.
In the battle of Print Farm Management,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Farm Management on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Cloud Fleet Management
Does it support cloud fleet management?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Ability to manage multiple devices remotely via cloud software.
In the battle of Cloud Fleet Management,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud Fleet Management on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Workflow Integration
Does it integrate with workflows?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Integration with professional workflow tools and design platforms.
In the battle of Workflow Integration,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Workflow Integration on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Multi-User Profiles
Does it support multi-user profiles?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Allows multiple users to have distinct profiles and permissions.
In the battle of Multi-User Profiles,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-User Profiles on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Remote Access Control
Does it support remote access control?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Ability to control printer access remotely with permissions.
In the battle of Remote Access Control,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Access Control on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Enterprise Security Features
Does it have enterprise security features?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Advanced security measures like encryption, secure login, and permissions.
In the battle of Enterprise Security Features,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Enterprise Security Features on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Licensing Options
Are licensing options available?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Availability of enterprise licensing for organizations.
In the battle of Licensing Options,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Licensing Options on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Usage Analytics Dashboard
Does it include a usage analytics dashboard?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Provides usage statistics and analytics for tracking productivity and costs.
In the battle of Usage Analytics Dashboard,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Usage Analytics Dashboard on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
SLA & Support Contracts
Are SLA or support contracts available?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Option for service-level agreements and premium support contracts.
In the battle of SLA & Support Contracts,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
SLA & Support Contracts on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Predictive Cost Estimation
Does it have predictive cost estimation?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Estimates printing costs (material, power, time) before job start.
In the battle of Predictive Cost Estimation,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Cost Estimation on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
In the battle of Filament Jam Detection,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Jam Detection on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Vibration Sensor
Does it include a vibration sensor?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Detects vibrations and compensates for print accuracy.
In the battle of Vibration Sensor,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Sensor on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Print Log Storage
Does it have print log storage?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Records print job history and diagnostic data.
In the battle of Print Log Storage,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Log Storage on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Remote Error Alerts
Does it provide remote error alerts?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Sends error notifications to remote devices.
In the battle of Remote Error Alerts,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Error Alerts on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Predictive Failure Logs
Does it support predictive failure logs?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Tracks and predicts potential failures before they occur.
In the battle of Predictive Failure Logs,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Failure Logs on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Calibration History Log
Does it have a calibration history log?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Stores history of calibration for quality control.
In the battle of Calibration History Log,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Calibration History Log on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Sensor Count
How many sensors are included?
0
ANYCUBIC Photon
0Votes
1
0
ANYCUBIC Photon S
0Votes
1
total number of sensors installed in the printer.
In the battle of Sensor Count,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Sensor Count on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Bed Temperature Sensors
Does it have bed temperature sensors?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Detects and regulates the build plate temperature.
In the battle of Bed Temperature Sensors,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Sensors on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Chamber Temperature Sensors
Does it have chamber temperature sensors?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Tracks and maintains chamber temperature for consistent prints.
In the battle of Chamber Temperature Sensors,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Sensors on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Extruder Pressure Sensor
Does it have an extruder pressure sensor?
No
0Votes
ANYCUBIC Photon
No
0Votes
ANYCUBIC Photon S
Monitors extrusion pressure to prevent under- or over-extrusion.
In the battle of Extruder Pressure Sensor,
ANYCUBIC Photon ◉ is
same as
ANYCUBIC Photon S ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Pressure Sensor on ANYCUBIC Photon ◉
vs ANYCUBIC Photon S ◉ and help others decide!
Surveys
Because hot takes deserve votes.
Printing Speed
How would you rate the printing speed of this 3D printer?
Lightning fast — Under 2 hours
0Votes
0Votes
Very fast — 2 to 5 hours
0Votes
0Votes
Fast — 5 to 10 hours
0Votes
0Votes
Moderate speed — 10 to 20 hours
0Votes
0Votes
Very slow — Over 20 hours
0Votes
0Votes
Print Quality and Detail
How would you describe the print quality and level of detail produced by this 3D printer?
Ultra fine detail — Layer height below 0.05 mm
0Votes
0Votes
Fine detail — Layer height 0.05 to 0.1 mm
0Votes
0Votes
Good detail — Layer height 0.1 to 0.2 mm
0Votes
0Votes
Decent detail — Layer height 0.2 to 0.3 mm
0Votes
0Votes
Rough and basic — Layer height above 0.3 mm
0Votes
0Votes
Build Volume Capacity
How do you find the build volume capacity of this 3D printer?
Extra large projects — Over 400 mm each side
0Votes
0Votes
Large projects — 300 to 400 mm each side
0Votes
0Votes
Medium projects — 200 to 300 mm each side
0Votes
0Votes
Small projects — 150 to 200 mm each side
0Votes
0Votes
Tiny prints only — Under 150 x 150 x 150 mm
0Votes
0Votes
Material Consumption Efficiency
How efficient is this 3D printer in using filament or resin materials?
Very efficient — Under 50 grams per model
0Votes
0Votes
Efficient — 50 to 70 grams per model
0Votes
0Votes
Decent efficiency — 70 to 100 grams per model
0Votes
0Votes
Average efficiency — 100 to 150 grams per model
0Votes
0Votes
Wasteful — Over 150 grams per model
0Votes
0Votes
Noise Level
How noisy is this 3D printer during operation?
Whisper quiet
0Votes
0Votes
Quiet most of the time
0Votes
0Votes
Manageable with background noise
0Votes
0Votes
Noticeable but tolerable
0Votes
0Votes
Loud and distracting
0Votes
0Votes
Durability and Lifespan
How durable does this 3D printer seem in terms of lifespan?
Very durable — Over 5 years
0Votes
0Votes
Long lasting — 3 to 5 years
0Votes
0Votes
Decent lifespan — 2 to 3 years
0Votes
0Votes
Short lifespan — 1 to 2 years
0Votes
0Votes
Breaks down quickly — Under 1 year
0Votes
0Votes
Performance
How would you rate the overall performance of this 3D printer in terms of print quality and reliability?
Excellent — Consistently produces high-quality prints with no issues
0Votes
0Votes
Good — Produces quality prints with minor inconsistencies
0Votes
0Votes
Average — Prints are acceptable with occasional issues
0Votes
0Votes
Below average — Frequent print failures or inconsistencies
0Votes
0Votes
Poor — Often fails to produce quality prints
0Votes
0Votes
Ease of Setup
How easy was the setup process for this 3D printer?
Very easy — The printer was simple to set up with clear instructions and minimal effort
0Votes
0Votes
Easy — Setup was straightforward, with only a few minor adjustments needed
0Votes
0Votes
Average — Setup was manageable but took time and required some troubleshooting
0Votes
0Votes
Challenging — Setup was difficult and required assistance from support or additional resources
0Votes
0Votes
Very difficult — Setup was complicated, with unclear instructions and many issues during the process
0Votes
0Votes
Pricing
How would you rate the pricing for this 3D printer?
Great value for money — Offers excellent features and performance at an affordable price
0Votes
0Votes
Pretty good price — Decent pricing for the features, a reasonable value
0Votes
0Votes
Fair deal — The price is acceptable but might be slightly high for the features offered
0Votes
0Votes
Kinda pricey — The price feels a bit high compared to similar models
0Votes
0Votes
Crazy expensive — The price is significantly higher than other options with similar features
0Votes
0Votes
Design Appeal
How would you rate the design appeal of this 3D printer?
Excellent — Sleek, modern design that looks great in any workspace
0Votes
0Votes
Good — Attractive and functional design that fits well in most environments
0Votes
0Votes
Average — Standard design with no particular standout features
0Votes
0Votes
Fair — Design feels bulky or outdated, but still serves its purpose
0Votes
0Votes
Poor — Unattractive design, clunky and may be an eyesore in most spaces
Supermod
Moderator
Recaptor
0
Cartling
